A novel free PhotoMetrix UVC is proposed for both the operation of a universal serial bus video camera (UVC) and multivariate image analysis, allowing a full solution for point-of-use analysis. A UVC was placed in an open-source 3D-printed chamber illuminated by a white light-emitting diode (LED) with controlled intensity of light. The digital images captured were converted into red, green, and blue (RGB) histograms, and regression models were used within the app. As a proof-of-concept, four adulterants in raw milk samples were determined. The coefficient of determination (R2Cal) for all models was higher than 0.99, and no significant differences (p < 0.05) between the measured and predicted values were identified. The root mean square error of calibration (RMSEC) and root mean square error of cross validation (RMSECV) were satisfactory, with values less than 0.1 and 0.7 g L-1, respectively. The recoveries ranged from 90 to 120% in spiked milk samples, and partial least square (PLS) models showed root mean square error of prediction (RMSEP) of 0.28, 0.33, 0.48 and 0.39 g L-1 for chloride, hypochlorite, hydrogen peroxide and starch, respectively. The PhotoMetrix UVC app was feasible for the colorimetric chemical analysis using a smartphone improving the applicability, mobility, and usability.

The use of paper devices in chemical analysis has been increased due to their low cost, high surface area, portability, and biodegradability. A novel use of paper devices is proposed using thermal infrared enthalpimetry (TIE) for a rapid, green, and high throughput determination of wine acidities. The determination of total, fixed, and volatile acidities in red, white, and sparkling wine was carried out, and the results were compared with AOAC titration method. A multichannel pipette was used for reagent addition and an infrared camera for the temperature monitoring. The pipetting and temperature measurement conditions presented direct influence in the deviations among the measurements. The results obtained by TIE presented an agreement between 96 and 104% with the reference method (AOAC 962.12), for all samples. A high sample throughput was achieved reaching 480 samples h-1 for total acidity. A significant reduction in sample volume and reagent consumption was also obtained, with energy consumption up to 60 times lower in relation to the AOAC method. The association of TIE with a paper device provided a rapid, reliable and green method for the determination of acidities of wines.

Content uniformity (CU) is a parameter used to ensure the uniformity of the amount of active substances in pharmaceutical preparations. It is often evaluated in the quality control of pharmaceutical dosage forms, and a novel method was proposed for CU determination using thermal infrared enthalpimetry (TIE). Captopril tablets were dissolved in 24-well microplates and the heat released from the reaction of captopril and I2 was monitored with an infrared camera. Some experimental parameters were adjusted, as captopril/I2 ratio, stirring speed and dispensing rate, and the most suitable conditions were 1.00:1.00 (v/v), 250 rpm and 0.57 mL s-1, respectively. Interferences from tablet adjuvants (e.g., starch, cellulose and lactose) were not observed. The results obtained by TIE did not differ statistically (Student’s t-test, p > 0.05) from those from official method (UV spectrophotometry) described in pharmacopeia. The TIE method required 31 and 12 times less reagent and time, respectively. Therefore, the proposed method was suitable for routine analysis and agrees with the requirements of green analytical chemistry.

This article describes the development of a mobile colorimetric analysis tool. The application, called PhotoMetrix, employs the techniques of simple linear correlation for univariate analysis and principal components analysis (PCA) for multivariate exploratory analysis. The image data are captured by the main camera of the device and converted into red, green and blue (RGB) histograms. As regards the application, the iron determinations were performed in vitamin supplements (univariate module) and differentiation of banknotes was performed by PCA (multivariate module). For the iron determinations, three samples of vitamins at concentrations of 14, 40 and 50 mg of iron per tablet were tested and the results were not statistically significant (p > 0.05) compared to the reference method. The differentiation of banknotes was performed on Brazilian and Argentinean banknotes. The results showed clustering of the same types of banknotes, and through the loadings graph it was possible to observe the variables through the formation of clusters.

Tannins from trees are an abundant renewable resource. The use of tannins is safe for the environment and human health, making it possible to develop environmentally friendly products, such as adhesives, flocculant agents for water treatment, flame retardant foams and anticorrosives. In this study, a methodology was developed for the identification of six commercial tannin extracts (chestnut, valonea, tara, myrobalan, quebracho and black wattle) using digital images on mobile devices. The identification of the extracts was based on principal component analysis using the PhotoMetrix® mobile application. In the evaluation of the principal components, it was possible to define the separation between the six classes of extracts by color evaluation, according to the extract origin. In the analysis of PC1 × PC2, black wattle was very close to quebracho and chestnut was close to valonea; these extracts are chemically similar. The methodology developed for the analysis of tannin extracts obeys the principles of green chemistry requiring no reagents, and is fast, non-destructive and inexpensive.

The objective of this work was to develop a free access exploratory data analysis software application for academic use that is easy to install and can be handled without user-level programming due to extensive use of chemometrics and its association with applications that require purchased licenses or routines. The developed software, called Chemostat, employs Hierarchical Cluster Analysis (HCA), Principal Component Analysis (PCA), intervals Principal Component Analysis (iPCA), as well as correction methods, data transformation and outlier detection. The data can be imported from the clipboard, text files, ASCII or FT-IR Perkin-Elmer “.sp” files. It generates a variety of charts and tables that allow the analysis of results that can be exported in several formats. The main features of the software were tested using midinfrared and near-infrared spectra in vegetable oils and digital images obtained from different types of commercial diesel. In order to validate the software results, the same sets of data were analyzed using Matlab© and the results in both applications matched in various combinations. In addition to the desktop version, the reuse of algorithms allowed an online version to be provided that offers a unique experience on the web. Both applications are available in English.

A solid sampling electrothermal vaporization inductively coupled plasma optical emission spectrometry (ETV-ICP OES) method for determination of As, Cd, Cr, Cu, Mn, Mo, Ni, Pb, Pd, Pt, Rh, Ru and V in pharmaceuticals is proposed. Tricyclic pharmaceuticals were directly analyzed due to their difficult decomposition with acids. Pyrolysis and vaporization temperature, sample mass, and reaction gas (Freon) flow rate were evaluated. The effect of organic and inorganic compounds was evaluated for matrix matching. The limits of detection ranged from 0.04 µg g−1 (Cu) to 107 µg g−1 (As) and the relative standard deviation was lower than 10%. The investigated elements were not detected in the analyzed samples with the exception of Cr in cyclobenzaprine hydrochloride. Since there was no certified reference materials available for metals and metalloids in pharmaceuticals, the accuracy of the method was evaluated by an independent technique and by analyte recovery. Inductively coupled plasma mass spectrometry was employed for analyte determination after sample decomposition by microwave induced combustion. The agreement of the results found by both techniques was better than 87% and analyte recoveries ranged from 91 to 103%.

Neste estudo Da exposição humana e ambiental ao Manganês (Mn) no Sul do Brasil foi realizada em duas etapas. O primeiro passo consistiu na análise de amostras de águas da superfície do rio Pardinho. Os resultados médios desta tecnica mostraram aumento significativo de poluentes, incluindo aumento dos níveis de Mn acima do padrão aceitável para o ambiente recomendado pelo Conselho Nacional de Meio Ambiente. Além disso, 64 amostras de solo foram coletadas em áreas com e sem atividade agrícola. Muitos resultados ficaram acima da média e não indicaram diferenças significativas dos níveis de Mn entre as áreas amostradas. Para o segundo passo, 12 famílias foram selecionadas e avaliadas quanto à exposição ao Manganês nas regiões com níveis elevados de Mn no solo. A maioria dos alimentos analisados continham Mn acima dos valores de referência, indicando que o alimento pode ser uma fonte importante de exposição. O teor de Mn no cabelo da maioria dos indivíduos estudados foi também elevado em comparação com valores de referência de populações não-expostas. Apesar de a contaminação parecer vir de uma origem natural, os resultados encontrados neste estudo mostraram que os níveis de Mn presentes na Bacia do Rio Pardinho são um relevante problema de saúde pública.

The study of environmental pathways and human exposure to Manganese (Mn) in Southern Brazil was performed using two steps. The first step consisted of taking water samples from the surface of the Pardinho River. The average results from this technique showed a significant increase of pollutants, including increased levels of Mn, above the environmentally acceptable standard recommended by the Brazilian National Environment Council. Additionally, 64 soil samples were taken from areas with and without agricultural activity. Many results were above the mean crust and did not indicate significant differences of Mn levels between the sampled areas. For the second step, 12 families were selected and assessed for exposure to Mn in a region with high levels of Mn in the soil. Most of the analyzed foods contained amounts of Mn above the reference values, indicating that food can be an important source of exposure. The Mn content from the hair of most subjects studied was also high compared to reference values from non-exposed populations. Although the contamination appeared to come from a natural origin, the results found in the present study showed that the Mn levels present in the Pardinho River Basin are a relevant public health issue.

Um novo sistema para análise direta de amostras sólidas por espectrometria de absorção atômica com chama é proposto como alternativa para a determinação de elementos traço em carvão. Para a demonstração do potencial do procedimento a determinação de manganês foi investigada. Amostras de carvão foram moídas e pesadas diretamente em recipientes de polietileno e transportadas na forma de um aerossol seco até uma cela de quartzo posicionada entre o feixe óptico e a base do queimador. Sinais transientes foram totalmente integrados em 1 segundo. A influência das condições operacionais sobre os sinais foi estudada. Sinais de fundo foram sempre baixos e uma massa característica de 1,9 ng Mn foi encontrada. Os resultados foram considerados satisfatórios com respeito à exatidão (entre 97,5 e 103,2%) e precisão (RSD melhor que 6%). O sistema proposto é simples e pode ser facilmente adaptado a espectrômetros comerciais, permitindo a análise de mais de 80 amostras por hora.

A new device for the direct solid analysis by flame atomic absorption spectrometry was investigated as an alternative technique for the determination of trace elements in coal. The potential application of the proposed procedure for the determination of manganese was investigated. Ground coal test samples were weighed directly into polyethylene vials and carried as a dry aerosol to a slotted quartz vaporization cell placed between the flame burner and optical path. The transient signals obtained were totally integrated in 1 second. The effect of operating conditions on the analytical signal was investigated. Background signals were always low and a Mn characteristic mass of 1.9 ng was found. Results were considered satisfactory regarding to both accuracy (between 97.5 and 103.2%) and precision (RSD better than 6%). The proposed system is simple and can be easily adapted to any conventional atomic absorption spectrometers allowing the analysis of more than 80 test samples in an hour.